Post‐construction cleaning can be exhausting and it requires quite a lot of elbow grease. Whether you’ve had a small or a big construction project going on, you’ll be dealing with a type of dirt you don’t encounter during regular house cleaning. This means you will need the right tools and supplies to get on top of this endeavor.
While people usually go to dependable companies in Lafayette and book their post‐construction cleaning service, you can use the following extensive list of the tools and supplies used by professionals for this kind of clean up and make it an excellent starting point of your clean up checklist.
What supplies are needed for post‐construction cleaning?
With post-construction cleaning, using the wrong equipment allows room for mistakes. However, using adequate tools and supplies will make it much easier for you to overcome any obstacles on your way. Have a look at the list of things you’ll need, divided into categories.
Protective gear
Protecting your health is very important, but people tend to bypass it not considering it necessary. The truth is that there are various hazards during and after construction, and wearing your protective gear protects against common dangers.
Almost any type of construction work leaves contaminants and dust particles that you can inhale, heavy objects that can fall from higher levels, and there are also harsh chemicals coming from cleaning agents.
Here’s what you’ll need to protect yourself:
- Heavy gloves
- Hard hats
- Goggles
- Face masks
- Respirators (if necessary)
General cleaning supplies
Since you’ll be dealing with different surfaces, you’ll need to get appropriate cleaners for efficient cleaning and to avoid damaging various materials. These are the required cleaning products:
- Glass cleaners (if possible, without ammonia)
- Metal cleaners (great for materials such as stainless steel, chrome, and brass)
- Neutral or all‐purpose cleaners (general cleaning)
- Disinfectants and sanitizers
- Oil soaps (to treat wood furniture, trim and paneling)
Floor and carpet cleaning tools and products
When it comes to floor cleaning, the first step is sweeping to remove larger debris, and then vacuuming to remove the remaining debris and dust. For this you’ll need:
- Dust pans
- Brooms
- Heavy duty or household vacuum cleaner (depending on the debris you need to remove and the size of the area you need to cover)
Next comes the deep cleaning of your carpets. If they are very dirty, you should first use a pre‐treatment product, followed by a stain‐removing cleaner if there are any stubborn stains.
If your carpets are not that dirty, you can start with a cleaning shampoo or detergent right away, just make sure you pick the one appropriate for your carpet’s type of fiber. You may consider renting a carpet extractor machine for thorough and easier cleaning.
Finally, you can deal with the floor surface. Here’s what you’ll need:
- A solution of mild soap and warm water (to clean most floors)
- Hardwood cleaning products (for wooden floors)
- Sealants for wooden floors
- Polishing products (for laminates and wooden floors)
If you need to cover a big area, you can always rent a floor scrubbing machine and equipment for waxing, polishing and buffing.
What companies in Lafayette offer a reliable post‐construction cleaning service?
